MAKEMAKE CRETA COB 18W is a premium-quality LED COB downlight designed for bright, focused and elegant illumination. Its modern design and premium reflector finish make it suitable for residential, commercial, retail and decorative lighting applications.
The CRETA COB 18W provides powerful and focused illumination with a 36° beam angle, making it ideal for highlighting specific areas and creating an attractive lighting environment. The HPF isolated flicker-free driver helps deliver stable and comfortable lighting performance.
Ideal for:
MAKEMAKE CRETA COB 18W — Powerful COB illumination, premium design and reliable long-lasting performance with 3-year warranty
7 W (~700 lm): Accent/cove lighting, narrow layered illumination, small rooms (≤10 sqm).
12 W (~1,200 lm): Typical living room or bedroom general lighting when spaced 1.2–1.5 m apart.
18 W (~1,800 lm): Spacious rooms, kitchens, office desks, corridor down‑the‑aisle lighting.
Spacing rule: aim for ~2× depth distance (i.e. 2.4–3.0 m between 12 W downlights in an 8‑ft ceiling for uniform illumination).
6. Installation Notes
Mounting depth: Below ceiling—use frame or spring‑clip type.
Junction box: Prefer fixtures with integrated pluggable driver box (BJC style).
Ventilation: Avoid insulating ceiling materials resting directly atop COB module; allow ≥12 mm vent space.
Orientation: COB must be upright (chip heat-sink above) to prevent driver overheating.
7 W (~700 lm): Accent/cove lighting, narrow layered illumination, small rooms (≤10 sqm).
12 W (~1,200 lm): Typical living room or bedroom general lighting when spaced 1.2–1.5 m apart.
18 W (~1,800 lm): Spacious rooms, kitchens, office desks, corridor down‑the‑aisle lighting.
Spacing rule: aim for ~2× depth distance (i.e. 2.4–3.0 m between 12 W downlights in an 8‑ft ceiling for uniform illumination).
6. Installation Notes
Mounting depth: Below ceiling—use frame or spring‑clip type.
Junction box: Prefer fixtures with integrated pluggable driver box (BJC style).
Ventilation: Avoid insulating ceiling materials resting directly atop COB module; allow ≥12 mm vent space.
Orientation: COB must be upright (chip heat-sink above) to prevent driver overheating.
MATERIAL SPECIFICATION
MATERIAL SPECIFICATION

